Designed specifically for vapor or liquid withdrawal service on DOT fork lift containers. Valves with 1.5 GPM closing flow are for use in small and medium size lift truck applications, while those with 2.6 GPM closing flow are for large lift trucks. Since none of these valves have an integral pressure relief valve, they may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that cylinder's capacity.

The integral excess flow valve found in all these service valves helps prevent excessive product loss in the event of fuel line rupture.
Request Information
Unit of Measure
Items
9101P5 Series 1.5 Gallon Per Minute (gpm) Liquid Closing Flow (Liquefied Petroleum (LP)-Gas) Department of Telecommunications (DOT) Fork Lift Containers Service Valve - (009101P5)

9101P5 Series 1.5 gpm Liquid Closing Flow (Liquefied Petroleum (LP)-Gas) DOT Fork Lift Containers Service Valve
Price QUOTE
9101P5 Series 1.5 Gallon Per Minute (gpm) Liquid Closing Flow (Liquefied Petroleum (LP)-Gas) Department of Telecommunications (DOT) Fork Lift Containers Service Valve - (009101P5)

9101P5 Series 2.6 gpm Liquid Closing Flow (Liquefied Petroleum (LP)-Gas) DOT Fork Lift Containers Service Valve
Price QUOTE
9101P6 Series 2.6 Gallon Per Minute (gpm) Liquid Closing Flow (Liquefied Petroleum (LP)-Gas) Department of Telecommunications (DOT) Fork Lift Containers Service Valve - (009101P6H)

9101P6 Series 2.6 gpm Liquid Closing Flow (Liquefied Petroleum (LP)-Gas) DOT Fork Lift Containers Service Valve
Price QUOTE
Description N/A

Dot Fork Lift Service Valve For Cylinders - No Withdrawal Connect. - 1.5 Gpm

 		N/A

Dot Fork Lift Service Valve For Cylinders - No Withdrawal Connect. - 2.6 Gpm

 		N/A

Dot Fork Lift Service Valve For Cylinders - 1/4" NPT Withdrawal Connect. - 2.6 Gpm
Container Connection Size N/A 3/4 in
Container Connection Type N/A Male National Gas Taper (MNGT)
Service Connection Size N/A 3/8 in
Service Connection Type N/A Male National Pipe Thread (MNPT)
Liquid Withdrawal Connection Size N/A None N/A None N/A 1/4 in
Liquid Withdrawal Connection Type N/A N/A N/A Male National Pipe Thread (MNPT)
Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 Pounds Per Square in Gauge (psig) Inlet Pressure N/A 430 scfh N/A 550 scfh N/A 550 scfh
Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 100 Pounds Per Square in Gauge (psig) Inlet Pressure N/A 900 scfh N/A 1,050 scfh N/A 1,050 scfh
Liquid Flow Capacity N/A 1.5 gpm N/A 2.6 gpm N/A 2.6 gpm
Approximate Filling Rate Liquid Flow at 10 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves N/A 5.0 gpm N/A 5.0 gpm N/A 4.5 gpm
Approximate Filling Rate Liquid Flow at 25 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves N/A 7.6 gpm N/A 7.6 gpm N/A 7.2 gpm
Approximate Filling Rate Liquid Flow at 50 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves N/A 10.7 gpm N/A 10.7 gpm N/A 10.3 gpm
Approximate Filling Rate Liquid Flow at 100 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves N/A 14.9 gpm N/A 14.9 gpm N/A 14.8 gpm
Rating N/A Automatic Certificate Management Environment (ACME) Department of Telecommunications (DOT) Underwriters Laboratories (UL®) Listed
Material N/A Brass
Alternate Part Number N/A 9101P5 N/A 9101P5H N/A 9101P6H
Capacity N/A 1.5 gpm N/A 2.6 gpm N/A
Accessories N/A

Part Number - 7141M
Part Name - Male Automatic Certificate Management Environment (ACME) Check Connectors

Part Number - 7141F
Part Name - Female Automatic Certificate Management Environment (ACME) Check Connectors

Part Number - 7141M-40/7141FP
Part Name - Cap
Additional Information N/A

When installed for liquid withdrawal, the 9101P6 Series has provisions for attachment of a liquid withdrawal tube. The 9101P5 Series must be installed in containers that have provisions for a separate liquid withdrawal.

To ensure proper functioning and maximum protection for integral excess flow valves, these service valves should be fully opened and back seated when in use.
Note N/A

These valves incorporate an excess flow valve. Refer to L-500/Section F, for complete information regarding selection, operation and testing of excess flow valves.