Designed specifically for vapor or liquid withdrawal service on ASME motor fuel containers. Since none of these valves have an integral pressure relief valve, they may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that container’s capacity.

The integral excess flow valve found in all these service valves helps prevent excessive product loss in the event of fuel line rupture.
Request Information
Unit of Measure
Items
901C Series 550 Standard Cubic Feet Per Hour (scfh) Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 Pounds Per Square in Gauge (psig) Inlet Pressure Motor Fuel Containers Service Valve - (000901C5)

901C Series 550 scfh Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 psig Inlet Pressure Motor Fuel Containers Service Valve
Price QUOTE
9101H Series 765 Standard Cubic Feet Per Hour (scfh) Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 Pounds Per Square in Gauge (psig) Inlet Pressure Motor Fuel Containers Service Valve - (009101H5)

9101H Series 765 scfh Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 psig Inlet Pressure Motor Fuel Containers Service Valve
Price QUOTE
9101H Series 550 Standard Cubic Feet Per Hour (scfh) Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 Pounds Per Square in Gauge (psig) Inlet Pressure Motor Fuel Containers Service Valve - (009101H6)

9101H Series 550 scfh Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 psig Inlet Pressure Motor Fuel Containers Service Valve
Price QUOTE
9101Y Series 765 Standard Cubic Feet Per Hour (scfh) Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 Pounds Per Square in Gauge (psig) Inlet Pressure Motor Fuel Containers Service Valve - (009101Y5H)

9101Y Series 765 scfh Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 psig Inlet Pressure Motor Fuel Containers Service Valve
Price QUOTE
Description N/A

ASME Motor Fuel Service Valve 3/4" M.NGT x F.Pol CGA 510 - 2.6 Gpm

 		N/A

ASME Motor Fuel Service Valve Heavy-Duty - 3/4" M.NGT x 3/8" SAE Flare

 		N/A

ASME Motor Fuel Service Valve Heavy-Duty - 3/4" M.NGT x 3/8" SAE Flare x 1/4" NPT

 		N/A

ASME Motor Fuel Service Valve Heavy-Duty - 3/4" M.NGT x 60 Deg. Angle 3/8" SAE Flare
Container Connection Size N/A 3/4 in
Container Connection Type N/A Male National Gas Taper (MNGT)
Service Connection Size N/A N/A 3/8 in N/A N/A 3/8 in
Service Connection Angle N/A N/A N/A N/A 60 º
Service Connection Type N/A FPOL Compressed Gas Association (CGA) 510 N/A Society of Automotive Engineers (SAE) Flare N/A N/A Society of Automotive Engineers (SAE) Flare
Liquid Withdrawal Connection Size N/A None N/A None N/A 1/4 in N/A None
Liquid Withdrawal Connection Type N/A N/A N/A National Pipe Thread (NPT) N/A
Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 25 Pounds Per Square in Gauge (psig) Inlet Pressure N/A 550 scfh N/A 765 scfh N/A 550 scfh N/A 765 scfh
Vapor Closing Flow (Liquefied Petroleum (LP)-Gas) at 100 Pounds Per Square in Gauge (psig) Inlet Pressure N/A 1,050 scfh N/A 1,300 scfh N/A 1,050 scfh N/A 1,300 scfh
Liquid Flow Capacity N/A 2.6 gpm N/A 3.6 gpm N/A 2.6 gpm N/A 3.6 gpm
Note for Closing Flow (Liquefied Petroleum (LP)-Gas) N/A

Based on 3/8" O.D. pigtail, 20" long or less, connected to valve outlet. For greater lengths, the pigtail must have a larger O.D.

In addition, 1/4" O.D. pigtails or POL connections for 1/4" O.D. should not be used with this valve.

 		N/A

Based on 3/8" O.D. pigtail, 20" long or less, connected to valve outlet. For greater lengths, the pigtail must have a larger O.D.

 		N/A

Based on 3/8" O.D. pigtail; 20" long or less, connected to valve outlet. Also based on 1/4" pipe size dip tube, 42" long or less, attached to special inlet connection. For longer pigtail lengths, the diameter of the pigtail must be increased.

 		N/A

Based on 3/8" O.D. pigtail, 20" long or less, connected to valve outlet. For greater lengths, the pigtail must have a larger O.D.
Rating N/A American Society of Mechanical Engineers (ASME) Underwriters Laboratories (UL®) Listed
Material N/A Brass
Alternate Part Number N/A 901C5 N/A 9101H5 N/A 9101H6 N/A 9101Y5H
Size N/A 3/4 in
Capacity N/A 2.6 gpm N/A N/A N/A
Additional Information N/A

When installed for liquid withdrawal, the 9101H6 has provisions for attachment of a liquid withdrawal tube. All other valves must be installed in containers that have provisions for a separate liquid withdrawal.

To ensure proper functioning and maximum protection from integral excess flow valves, these service valves should be fully opened and back seated when in use.
Note N/A

These valves incorporate an excess flow valve. Refer to L-500/Section F, for complete information regarding selection, operation and testing of excess flow valves.

 		N/A

Heavy-duty models

These valves incorporate an excess flow valve. Refer to L-500/Section F, for complete information regarding selection, operation and testing of excess flow valves.

 		N/A

Heavy-duty models

These valves incorporate an excess flow valve. Refer to L-500/Section F, for complete information regarding selection, operation and testing of excess flow valves.

 		N/A

Heavy-duty models

These valves incorporate an excess flow valve. Refer to L-500/Section F, for complete information regarding selection, operation and testing of excess flow valves.