VALVES: Pressure Relief & Relief Valve Manifolds
External "Pop-Action" Supplementary Pressure Relief Valves for Small ASME Containers and DOT Cylinders 3127 and 3129 Series
Designed for use as a supplementary relief valve on small ASME above ground and underground containers. They may also be used as a primary or secondary relief device on DOT cylinders, or as hydrostatic relief valves.
All working components of these relief valves are outside the container connection, so the valves must be protected from physical damage.
Container Type |
N/A Department of Telecommunication (DOT) |
Approximate Overall Height (B) |
N/A 2-19/32 in |
Section Hexagonal Wrench (C) |
N/A 1 1/8 in |
Suitable for Tanks with Surface Area Up To |
N/A 200 lbs/propane |
Rating |
N/A Department of Telecommunication (DOT) American Society of Mechanical Engineers (ASME) Underwriters Laboratories (UL®) Listed |
Size |
N/A 1/2 in |
Capacity |
N/A 375 lb |
Material |
N/A Brass |
Alternate Part Number |
N/A 3129K |
Container Connection Size (A) |
N/A 1/2 in |
Container Connection Type (A) |
N/A Male National Pipe Thread (MNPT) |
Rego® Rated Flow Capacity Per Air at 480 Pounds Per Square Inch Gauge (psig) Pressure |
N/A 780 scfm |
Accessories |
N/A
Part Number - 3129-40P |