Excess Flow Valves for Liquid or Vapor 3272 Series, 3282 Series, 3292 Series,A3272 Series, A3282 Series, A3292 Series, 7574 and 12472
Designed for liquid or vapor use for filling, withdrawal and vapor equalizing in container or line applications. They are intended for long lines or branch piping where tank-mounted excess flow valves are inadequate.
Material |
N/A Brass |
Hexagonal Wrench Flats (C) |
N/A 2-1/4 in |
Rating |
N/A Underwriters Laboratories (UL®) Listed |
Inlet Connection Size (A) |
N/A 1-1/2 in |
Outlet Connection Size (B) |
N/A 1-1/2 in |
Inlet Connection Type |
N/A Male National Pipe Thread (MNPT) |
Outlet Connection Type |
N/A Female National Pipe Thread (FNPT) |
Approximate Propane Liquid Closing Flow |
N/A 90 gpm |
Approximate Propane Vapor Closing Flow at 25 Pounds Per Square Inch Gauge (psig) Inlet Pressure |
N/A 15,200 scfh |
Approximate Propane Vapor Closing Flow at 100 Pounds Per Square Inch Gauge (psig) Inlet Pressure |
N/A 28,100 scfh |
Note for Closing Flow |
N/A
Based on horizontal installation of excess flow valve. Flows are slightly more when valves are installed with outlet up; slightly less when installed with outlet down. |
Note |
N/A
Multiply flow rate by 0.94 to determine liquid butane flow and by 0.90 to determine liquid anhydrous ammonia flow. |
