Designed for top installation, in any position, in liquid or vapor service lines. They are intended for long lines or branch piping where tank mounted excess flow valves cannot suffice.
Size |
N/A 1 in |
Material |
N/A Steel |
Capacity |
N/A 25 gpm |
Hexagonal Wrench Flats (C) |
N/A 1-3/4 in |
Approximate Effective Length (D) |
N/A 3-1/2 in |
Alternate Part Number |
N/A A1519A2 |
Rating |
N/A Underwriters Laboratories (UL®) Listed |
Inlet Connection Size (A) |
N/A 1 in |
Outlet Connection Size (B) |
N/A 1 in |
Inlet Connection Type |
N/A National Pipe Thread (NPT) |
Outlet Connection Type |
N/A Female National Pipe Thread (FNPT) |
Approximate Propane Liquid Closing Flow |
N/A 25 gpm |
Approximate Propane Vapor Closing Flow at 25 Pounds Per Square Inch Gauge (psig) Inlet Pressure |
N/A 5,000 scfh |
Approximate Propane Vapor Closing Flow at 100 Pounds Per Square Inch Gauge (psig) Inlet Pressure |
N/A 8,800 scfh |
Note for Closing Flow |
N/A
Based on horizontal installation of excess flow valve. Flows are slightly more when valves are installed with outlet up; slightly less when installed with outlet down. |
Note |
N/A
Multiply flow rate by 0.94 to determine liquid butane flow and by 0.90 to determine liquid anhydrous ammonia flow. |
