Print Back
Designed especially for liquid transfer of LP-Gas from consumer bulk storage containers when used with a Chek-Lok® or equipped with an integral excess flow valve. May also be used for vapor LP-Gas service.

In NH3 applicator tanks they may be used as a vapor bleeder valve or as a liquid withdrawal valve when installed in a coupling with a dip pipe.
7550 Series 3/4 Inch (in) Outlet Connection Size Flange Seal Liquid Transfer Angle Valve - (007550P)
Unit of Measure
Items 7550 Series 3/4 Inch (in) Outlet Connection Size Flange Seal Liquid Transfer Angle Valve - (007550P)
007550P
7550 Series 3/4" Outlet Connection Size Flange Seal Liquid Transfer Angle Valve
Price QUOTE
7550 Series 3/4 Inch (in) Outlet Connection Size Flange Seal Liquid Transfer Angle Valve - (A007550P)
A007550P
7550 Series 3/4" Outlet Connection Size Flange Seal Liquid Transfer Angle Valve
Price QUOTE
7550 Series 3/4 Inch (in) Outlet Connection Size Flange Seal Liquid Transfer Angle Valve - (007550PX)
007550PX
7550 Series 3/4" Outlet Connection Size Flange Seal Liquid Transfer Angle Valve
Price QUOTE
7550 Series 3/4 Inch (in) Outlet Connection Size Flange Seal Liquid Transfer Angle Valve - (A007550PX)
A007550PX
7550 Series 3/4" Outlet Connection Size Flange Seal Liquid Transfer Angle Valve
Price QUOTE
7550 Series 3/4 Inch (in) Outlet Connection Size Flange Seal Liquid Transfer Angle Valve - (007550P)
007551P
7551 Series 1/2" Outlet Connection Size Flange Seal Liquid Transfer Angle Valve
Price QUOTE
Description N/A

Designed especially for liquid transfer of LP-Gas from consumer bulk storage containers when used with a Check-Lok or equipped with an integral excess flow valve. May also be used for vapor LP-Gas service.

Size N/A 3/4 in N/A 3/4 in N/A 3/4 in N/A 3/4 in N/A
Material N/A Brass N/A Ductile Iron N/A Brass N/A Ductile Iron N/A Brass
Inlet Connection Size N/A 3/4 in
Outlet Connection Size N/A 3/4 in N/A 3/4 in N/A 3/4 in N/A 3/4 in N/A 1/2 in
Inlet Connection Type N/A Male National Pipe Thread (MNPT)
Outlet Connection Type N/A Female National Pipe Thread (FNPT)
Integral Excess Flow N/A false N/A false N/A true N/A true N/A false
Propane Flow at 1 Pounds Per Square Inch Gauge (psig) Pressure Drop Flow Coefficient (Cv) N/A 13.3 gpm N/A 13.3 gpm N/A N/A N/A 8.9 gpm
Approximate Propane Excess Closing Flow N/A N/A N/A 16.0 gpm N/A 16.0 gpm N/A
Rating N/A Underwriters Laboratories (UL®) Listed
Alternate Part Number N/A 7550P N/A N/A 7550PX N/A N/A 7551P
Accessories N/A

Part Number - 3127U
Part Name - Hydrostatic Relief Valve

Part Number - 3165
Part Name - Vent Valve

N/A

Part Number - SS8001J
Part Name - Hydrostatic Relief Valve

Part Number - TSS3169
Part Name - Vent Valve

N/A

Part Number - 3127U
Part Name - Hydrostatic Relief Valve

Part Number - 3165
Part Name - Vent Valve

N/A

Part Number - SS8001J
Part Name - Hydrostatic Relief Valve

Part Number - TSS3169
Part Name - Vent Valve

N/A

Part Number - 3127U
Part Name - Hydrostatic Relief Valve

Part Number - 3165
Part Name - Vent Valve

Note for Pressure Flow N/A

To obtain approximate flow at other than 1 PSIG pressure drop, multiply flow in table by square root of pressure drop. Example: 7550P at 9 PSIG = 13.3 x √9 = 39.9 GPM/propane. For NH3flow, multiple propane flow by 0.90.

Note for Excess Flow N/A

For NH3flow, multiply propane flow by 0.90.

Additional Information N/A

These liquid transfer valves are equipped with an integral excess flow valve for liquid transfer directly from the tank fitting, or without an integral excess flow for LP-Gas transfer through a Check-Lok®.

When equipped with an integral excess flow valve (7550PX), the valve should be mounted in a forged steel 3000 lb. half coupling. When mounted in a 1 1/4" x 3/4" NPT reducing coupling, the 3/4" female thread in this coupling must be full length - equivalent to a forged steel 3000 lb. half coupling.

The excess flow valve will not function properly if these specifications are not met. Refer to the Warning Bulletin in the Excess Flow Valve Section of this catalog.