8544 Series relief valves are designed for use as a primary relief valve in smaller ASME and DOT motor fuel containers such as on tractors, lift trucks, cars and taxicabs.
Unit of Measure
Specifications
Size |
N/A 1 in |
Start To Discharge Setting |
N/A 250 psig |
Container Connection (A) Size |
N/A 1 in |
Container Connection Type (A) |
N/A Male National Pipe Thread (MNPT) |
Container Type |
N/A American Society of Mechanical Engineers (ASME) |
Approximate Overall Height (B) |
N/A 5 7/16 in |
Approximate Height Above Coupling (C) |
N/A 7/8 in |
Hex Wrenching Section (D) |
N/A 1 5/16 in |
| Underwriters Laboratories (UL®) Air Flow Capacity (At 120 Percent of Set Pressure)1 | N/A 1020 scfm |
| ASME Air Flow Capacity (At 120 Percent of Set Pressure)2 | N/A 936 scfm |
Protective Cap (Included) |
N/A 7544-41G |
Rating |
N/A American Society of Mechanical Engineers (ASME) Department of Telecommunications (DOT) Underwriters Laboratories (UL®) Listed |
Material |
N/A Brass |
Alternate Part Number |
N/A 8544G |
- 1 Flow rates shown are for bare relief valves. Adapters and pipeaway will reduce flow as discussed in the Foreword section.
- 2 Flow rates shown are for bare relief valves. Adapters and pipeaway will reduce flow as discussed in the Foreword section.
