Designed specifically for use as a primary relief valve on forklift cylinders, the 8545AK reduces the possibility of improper functioning of the relief mechanism due to foreign material build up. All guides, springs, stem and adjusting components are located inside the cylinder - removed from the direct exposure of foreign materials and debris from the atmosphere.
NFPA Pamphlet #58 requires that:
"All containers used in industrial truck (including forklift truck cylinders) service shall have the container pressure relief valve replaced by a new or unused valve within 12 years of the date of manufacture of the container and each 10 years thereafter."
NFPA Pamphlet #58 requires that:
"All containers used in industrial truck (including forklift truck cylinders) service shall have the container pressure relief valve replaced by a new or unused valve within 12 years of the date of manufacture of the container and each 10 years thereafter."
Unit of Measure
Specifications
Size |
N/A 3/4 in |
Start To Discharge Setting |
N/A 375 psig |
Container Connection (A) Size |
N/A 3/4 in |
Container Connection Type (A) |
N/A Male National Pipe Thread (MNPT) |
Container Type |
N/A Department of Telecommunications (DOT) |
| Rego® Rated Air Flow Capacity at 480 Pounds Per Square Inch Gauge (psig) Pressure1 | N/A 400 scfm |
Rating |
N/A Department of Telecommunications (DOT) Underwriters Laboratories (UL®) Listed |
Material |
N/A Brass |
Alternate Part Number |
N/A 8545AK |
Accessories
| Accessories (Order Separately)2 |
N/A
Part Number - 11557-19 Part Name - Protective Cap Part Number - 7545-14 Part Name - 45º Elbow Deflector Part Note - Order protective cap #8545-41 or 7545-40. Part Number - 7545-12 Part Name - 90º Elbow Deflector Part Note - Order protective cap #8545-41 or 7545-40. |
-
1 Flow rates are shown for bare relief valves. Adapters and pipeaways will reduce flow as discussed in the Foreword section.
Classified by U.L. in accordance with Compressed Gas Association Pamphlet S-1.1 Pressure Device Standards for Cylinders.
Meets requirements for use on DOT containers with 262 pounds or less weight of water or 109 pounds or less of LP-Gas. - 2 Order protective cap #8545-41 or 7545-40.
