Designed to reduce first stage pressure normally 10 PSIG down to burner pressure, normally 11" w.c. and are ideal for medium commercial installations, multiple cylinder installations and normal domestic loads. engineered to isolate potential electrical current from metallic piping before entering a building. The use of a separate dielectric union is not necessary because the regulator contains a dielectric union as part of the inlet assembly.
Unit of Measure
Specifications
Number of Inlet Connectors |
N/A 1 |
Inlet Connection Size |
N/A 1/2 in |
Inlet Connection Type |
N/A Male Flare |
Outlet Connection Size |
N/A 3/4 in |
Outlet Connection Type |
N/A Female National Pipe Thread (FNPT) |
Inlet Material |
N/A Brass |
Orifice Size |
N/A 3/16 in |
Factory Delivery Pressure at 10 Pounds Per Square Inch Gauge (psig) Inlet Pressure |
N/A 11 inWc |
Pressure Adjustment Range |
N/A 9 to 13 inWc |
Bonnet Vent Position |
N/A Over Inlet |
Propane Vapor Capacity1 | N/A 1,000,000 Btu/hr |
Pressure Rating |
N/A 10 psig |
Capacity |
N/A 1,000,000 Btu/hr |
Material |
N/A Die-Cast Zinc |
- 1 Maximum flow based on 10 PSIG inlet and 9" w.c. delivery pressure.