Request Information
High pressure / high temperature industrial/commercial pounds-to-pounds regulator. Ideal for crop drying, heat treating, asphalt batch mixing and other large industrial and commercial load application utilizing high temperature LPG. Tee handle. 1/2" F.NPT inlet & outlet connection. 3-30 PSIG delivery pressure. 7,000,000 BTU capacity.
Unit of Measure

Specifications

Service

 N/A Liquefied Petroleum (LP)-Gas

Adjustment Method

 N/A Tee Handle

Width

 N/A 2-7/8 in

Height

 N/A 8-7/8 in

Inlet Connection Size

 N/A 1/2 in

Inlet Connection Type

 N/A Female National Pipe Thread (FNPT)

Outlet Connection Size

 N/A 1/2 in

Outlet Connection Type

 N/A Female National Pipe Thread (FNPT)

Recommended Delivery Pressure Range

 N/A 3 to 30 psig
Capacity Determined at Set Pressure1 N/A 20 psig
Propane Vapor Capacity2 N/A 7,000,000 Btu/hr

Capacity

 N/A 7,000,000 Btu/hr

Atmosphere Temperature

 N/A Up to 300 ºF

Size

 N/A 1/2 in

Rating

 N/A National Fire Protection Association (NFPA) 58 Underwriters Laboratories (UL®) Listed

Material

 N/A Die-Cast Zinc

Note

Note

 N/A Care must be taken to prevent re-liquification of propane at normal temperatures by heat tracing or other effective means. Use of a relief valve upstream or downstream of these regulators is recommended in accordance with NFPA 58.
  • 1 Set pressure is established with 100 PSIG inlet pressure and a flow of 500,000 BTU/hr. propane.
  • 2 Capacity determined at 100 PSIG inlet, set pressure noted on chart at 20% drop.