Request Information

Designed to reduce LP-Gas and anhydrous ammonia container pressures to between 3 and 125 PSIG.

Unit of Measure

Specifications

Service

 N/A Ammonia (NH3)

Adjustment Method

 N/A Tee Handle

Inlet Connection Size

 N/A 3/4 in

Inlet Connection Type

 N/A Female National Pipe Thread (FNPT)

Outlet Connection Size

 N/A 3/4 in

Outlet Connection Type

 N/A Female National Pipe Thread (FNPT)

Recommended Delivery Pressure Range

 N/A 20 to 50 psig

Width (A)

 N/A 3-1/2 in

Maximum Height (B)

 N/A 7 in
Capacity Determined at Set Pressure1 N/A 30 psig
Capacity2 N/A 7,700 ft³/h

Size

 N/A 3/4 in

Rating

 N/A National Fire Protection Association (NFPA) 58 Underwriters Laboratories (UL®) Listed

Material

 N/A Aluminum

Note

Note

 N/A

Care must be taken to prevent re-liquification of propane at normal temperatures by heat tracing or other effective means. Use of a relief valve upstream or downstream of these regulators is recommended in accordance with NFPA 58.
  • 1 Set pressure is established with 100 PSIG inlet pressure and a flow of 500,000 BTU/hr. propane.
  • 2 Capacity determined at 100 PSIG inlet, set pressure noted on chart at 20% drop.