High pressure industrial/commercial pounds-to-pounds regulator. For LPG service. Tee handle. 1/2" F.NPT inlet & outlet connection. 45-125 PSIG delivery pressure.

Unit of Measure

Specifications

Service

N/A Liquefied Petroleum (LP)-Gas

Adjustment Method

N/A Tee Handle

Inlet Connection Size

N/A 1/2 in

Inlet Connection Type

N/A Female National Pipe Thread (FNPT)

Outlet Connection Size

N/A 1/2 in

Outlet Connection Type

N/A Female National Pipe Thread (FNPT)

Recommended Delivery Pressure Range

N/A 45 to 125 psig

Width (A)

N/A 2-15/16 in

Maximum Height (B)

N/A 4-7/8 in
Capacity Determined at Set Pressure1 N/A 60 psig
Capacity2 N/A 10,000,000 Btu/hr

Size

N/A 1/2 in

Rating

N/A National Fire Protection Association (NFPA) 58 Underwriters Laboratories (UL®) Listed

Material

N/A Die-Cast Zinc

Note

Note

N/A

Care must be taken to prevent re-liquification of propane at normal temperatures by heat tracing or other effective means. Use of a relief valve upstream or downstream of these regulators is recommended in accordance with NFPA 58.

  • 1 Set pressure is established with 100 PSIG inlet pressure and a flow of 500,000 BTU/hr. propane.
  • 2 Capacity determined at 100 PSIG inlet, set pressure noted on chart at 20% drop.