Designed for liquid or vapor use for filling, withdrawal and vapor equalizing in container or line applications. They are intended for long lines or branch piping where tank-mounted excess flow valves are inadequate.
Unit of Measure
Specifications
Size |
N/A 1-1/4 in |
Material |
N/A Brass |
Capacity |
N/A 30 gpm |
Hexagonal Wrench Flats (C) |
N/A 2 in |
Alternate Part Number |
N/A 3282A |
Rating |
N/A Underwriters Laboratories (UL®) Listed |
Connection
Inlet Connection Size (A) |
N/A 1-1/4 in |
Outlet Connection Size (B) |
N/A 1-1/4 in |
Inlet Connection Type |
N/A Male National Pipe Thread (MNPT) |
Outlet Connection Type |
N/A Female National Pipe Thread (FNPT) |
Closing Flow
Approximate Propane Liquid Closing Flow |
N/A 30 gpm |
Approximate Propane Vapor Closing Flow at 25 Pounds Per Square Inch Gauge (psig) Inlet Pressure |
N/A 5,850 scfh |
Approximate Propane Vapor Closing Flow at 100 Pounds Per Square Inch Gauge (psig) Inlet Pressure |
N/A 10,000 scfh |
Note
Note for Closing Flow |
N/A
Based on horizontal installation of excess flow valve. Flows are slightly more when valves are installed with outlet up; slightly less when installed with outlet down. |
Note |
N/A
Multiply flow rate by 0.94 to determine liquid butane flow and by 0.90 to determine liquid anhydrous ammonia flow. |
