These Multivalves provide vapor withdrawal and filling of ASME containers. A separate pressure relief valve is required in addition to this valve. The Multibonnet is standard on this valve.
Unit of Measure

Specifications

Material

N/A Brass

Filling Connection Size

N/A 1-3/4 in

Filling Connection Type

N/A Male American Corps of Mechanical Engineering (MACME)

Container Connection Size

N/A 1 1/2 in

Container Connection Type

N/A Male National Pipe Thread (MNPT)

Service Connection Type

N/A FPOL US Compressed Gas Association (CGA) 510

Vapor Equalizing Connection Size

N/A 1-1/4 in

Vapor Equalizing Connection Type

N/A Male American Corps of Mechanical Engineering (MACME)

Vapor Equalizing Connection Underwriters Laboratories (UL®) Listed Closing Flow at 100 Pounds Per Square in Gauge (psig)

N/A 4200 ft³/h

Fixed Liquid Level Vent Valve Style

N/A Knurled
Dip Tube Length1 N/A 16 in

Containers Use with Surface Area

N/A Since these Multivalves® have no integral pressure relief valves, they can be used on any ASME container with an independent relief device sufficient for that tank’s capacity.

Approximate Filling Rate Liquid Flow at 10 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves

N/A 42 gpm

Approximate Filling Rate Liquid Flow at 25 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves

N/A 72 gpm

Approximate Filling Rate Liquid Flow at 50 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves

N/A 98 gpm

Approximate Filling Rate Liquid Flow at 100 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves

N/A 125 gpm

Rating

N/A American Society of Mechanical Engineers (ASME) Underwriters Laboratories (UL®) Listed

Alternate Part Number

N/A 8593AL16.0
  • 1 Dip tube not installed, may be cut by customer to desired length.