These Multivalves® permit liquid withdrawal from DOT cylinders with up to 100 lbs. propane capacity. They eliminate unnecessary cylinder handling when servicing high volume loads and allow onsite filling into the vapor space without interrupting gas service.
Unit of Measure

Connection

Filling Connection Size

N/A 1-3/4 in

Filling Connection Type

N/A Male American Corps of Mechanical Engineering (MACME)

Container Connection Size

N/A 3/4 in

Container Connection Type

N/A Male National Gas Taper (MNGT)
Service Connection Type1 N/A Compressed Gas Association (CGA) 555

Specifications

Fixed Liquid Level Vent Valve Style

N/A Knurled

Dip Tube with Deflector Length

N/A 11.6 in

Liquid Withdrawal Tube Length

N/A 44 in

Pressure Relief Valve Setting

N/A 375 psig
For Use In Cylinders with Propane Capacity Up to2 N/A 100 lb
Liquid Closing Flow (Liquefied Petroleum (LP)-Gas)3 N/A 1.7 gpm

Capacity

N/A 100 lb

Rating

N/A American Society of Mechanical Engineers (ASME) Department of Telecommunications (DOT) Underwriters Laboratories (UL®) Listed

Material

N/A Brass

Alternate Part Number

N/A 8555DL11.6

Liquid Filling Rates

Approximate Filling Rate Liquid Flow at 10 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves

N/A 8 gpm

Approximate Filling Rate Liquid Flow at 25 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves

N/A 23 gpm

Approximate Filling Rate Liquid Flow at 50 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves

N/A 34 gpm

Approximate Filling Rate Liquid Flow at 100 Pounds Per Square in Gauge (psig) Pressure Drop Across Valves

N/A 42 gpm

Note

Note

N/A 72 orifice low emission version is also available.
  • 1 Use adapter 12982 to connect to pipe threads.
  • 2 Per CGA Pamphlet S-1.1.
  • 3 To ensure proper functioning and maximum protection from integral excess flow valves, the cylinder valve should be fully opened and backseated when in use.