Industrial Propane Service, Inc.
Industrial Propane Service, Inc.
303 W. Maple St.
P.O. Box 145
Byron, MI 48418 USA
Phone: 800.621.4137
Fax: 810.266.4687
Email: sales@ipsequipment.com
Website: www.whyips.com
Print Back
Motor speed pumps for cylinder filling, low volume motor fuelling and small vaporizers. Capacities to 15 U.S. gpm (57 lmp).
Unit of Measure

Specifications

Factory Relief Valve Setting

 N/A 105 psi7.24 bar

Pump and Motor Speed

 N/A 1,750 rpm

Maximum Differential Pressure

 N/A 125 psi8.62 bar

Maximum Working Pressure

 N/A 350 psi24.13 bar

Normal Time to Fill Liquefied Petroleum (LP) Gas Cylinders at 20 Pound (lb) (9 Kilogram (kg)) Cylinder

 N/A 3/4 min

Normal Time to Fill Liquefied Petroleum (LP) Gas Cylinders at 100 Pound (lb) (45 Kilogram (kg)) Cylinder

 N/A 3 min
Standard Motor Power1 N/A 1 hp

Approximate Delivery of Propane at Differential Pressures and Pump Speeds

Flow Rate (Approximate Delivery of Propane at Differential Pressures and 1,750 Revolutions Per Minute (rpm) Pump and Motor Speed at 50 Pounds per Square Inch (psi) (3.45 Bar))

 N/A 8.0 gpm30.3 L/min

Flow Rate (Approximate Delivery of Propane at Differential Pressures and 1,750 Revolutions Per Minute (rpm) Pump and Motor Speed at 100 Pounds per Square Inch (psi) (6.89 Bar))

 N/A 6.0 gpm22.7 L/min

Note for Approximate Delivery of Propane at Differential Pressures and Pump Speeds

 N/A Check the pump's delivery and brake horsepower requirements in the performance curves below. Footnote with the curves which explains the factors that can cause delivery to vary.

Motor Size

Minimum Frame Motor Size for Mounting on Standard Base

 N/A 56C
Maximum Frame Motor Size for Mounting on Standard Base2 N/A 184C
  • 1 Motors may be specified from Electric Motor Price List No. 10-MTRG-01 (explosion-proof manual start switch for 1 & 1-1/2 horsepower single-phase motors also available).
  • 2 Motor adapters are available for NEMA C-face or IEC flanged-face motors. Pump flange will not accept 182TC/184TC frames.