Industrial Propane Service, Inc. - Motor Speed Pumps for Cylinder Filling - Compare Items

Skip To Content

Catalog

IPS Equipment is wholesale only. Please login to your business account to order. To request an online account, please contact us!

Motor speed pumps for cylinder filling, low volume motor fuelling and small vaporizers. Capacities to 15 U.S. gpm (57 lmp).

Request Information

Unit of Measure

Items	LGF1E 105 Pound Per Square Inch (psi) Factory Relief Valve Setting Motor Speed Pump for Cylinder Filling Price QUOTE Add To Cart Request Quote	LGF1PE 120 Pound Per Square Inch (psi) Factory Relief Valve Setting Motor Speed Pump for Cylinder Filling Price QUOTE Add To Cart Request Quote
Description	N/A Motor speed pumps for cylinder filling, low volume motor fuelling and small vaporizers. Capacities to 15 U.S. gpm (57 lmp).
Factory Relief Valve Setting	N/A 105 psi7.24 bar	N/A 120 psi8.27 bar
Pump and Motor Speed	N/A 1,750 rpm
Flow Rate (Approximate Delivery of Propane at Differential Pressures and 1,750 Revolutions Per Minute (rpm) Pump and Motor Speed at 50 Pounds per Square Inch (psi) (3.45 Bar))	N/A 8.0 gpm30.3 L/min	N/A 13.0 gpm49.2 L/min
Flow Rate (Approximate Delivery of Propane at Differential Pressures and 1,750 Revolutions Per Minute (rpm) Pump and Motor Speed at 100 Pounds per Square Inch (psi) (6.89 Bar))	N/A 6.0 gpm22.7 L/min	N/A 10.0 gpm37.9 L/min
Note for Approximate Delivery of Propane at Differential Pressures and Pump Speeds	N/A Check the pump's delivery and brake horsepower requirements in the performance curves below. Footnote with the curves which explains the factors that can cause delivery to vary.
Maximum Differential Pressure	N/A 125 psi8.62 bar
Maximum Working Pressure	N/A 350 psi24.13 bar
Normal Time to Fill Liquefied Petroleum (LP) Gas Cylinders at 20 Pound (lb) (9 Kilogram (kg)) Cylinder	N/A 3/4 min	N/A 1/2 min
Normal Time to Fill Liquefied Petroleum (LP) Gas Cylinders at 100 Pound (lb) (45 Kilogram (kg)) Cylinder	N/A 3 min	N/A 2 min
Standard Motor Power¹	N/A 1 hp	N/A 1-1/2 hp
Minimum Frame Motor Size for Mounting on Standard Base	N/A 56C
Maximum Frame Motor Size for Mounting on Standard Base²	N/A 184C
¹ Motors may be specified from Electric Motor Price List No. 10-MTRG-01 (explosion-proof manual start switch for 1 & 1-1/2 horsepower single-phase motors also available). ² Motor adapters are available for NEMA C-face or IEC flanged-face motors. Pump flange will not accept 182TC/184TC frames.